Brusa di Garboli LPC

Brusa LPC90-160-300-400

Sanding machine for curved pieces type LPC 90, to sand small pieces very curved witha minimum bending radius of 45 mm.

LPC 90
Diametro minimo (mm) Minimu diameter	10
Diametro massimo (mm) Maximum diameter	25
Avanzamento Feed	manuale manual
Raggio minimo (mm) Minimu radius	45
Motore (Kw) Motor	0,5
Peso netto ca. (Kg) Net weight about	70
Imballo via mare (cm) Seaworthy package	115x 55x h65

LPC 160

Sanding m/c. for curved pieces type LPC 160, to sand pieces with max. dia. of 46 mm. Special equipments.

LPC 160		LPC 300
Diametro minimo (mm) Minimu diameter	10		10
Diametro massimo (mm) Maximum diameter	46		100
Raggio minimo di curvatura (mm) Minimum bending radius	80		150
Dimensione nastri abrasivi (mm) Sanding belts development	622x30		940x60
Motore disco (Kw) Disk power	1,1		1,5
Motore nastri (Kw) Belts motor	2,2		3
Peso netto ca. (Kg) Net weight about	170		240
Imballo via mare (cm) Seaworthy package	98x 78x h128		83x 113x h150

LPC 300

Sanding m/c. for curved pieces type LPC 300, to sand pieces with max. dia. of 100 mm. Special equipments.

LPC400

Sanding m/c. for curved pieces type LPC 400, to sand pieces with max. dia. of 120 mm

LPC 400
Diametro minimo (mm) Minimu diameter	10
Diametro massimo (mm) Maximum diameter	120
Raggio minimo (mm) Minimum ray	200
Dimensione nastri abrasivi (mm) Sanding belts dimension	1250x 80
Motore disco (Kw) Disk motor	1,5
Motore nastri (Kw) Belts motor	4
Peso netto ca. escluso avanzamento (Kg) Net weight about without feeder	360
Imballo via mare (cm) Seaworthy package	170x 130x h160

Thu 17 May 2012 | 3:05 pm

The number of new homes started by house builders in England fell again in the first three months of the year, according to official figures.

Thu 17 May 2012 | 2:57 pm

A parliamentary committee questions the length and quality of some apprenticeships, saying six month programmes are of no real benefit.

Thu 17 May 2012 | 2:11 pm

David Cameron says it was "more dangerous to stay silent than to speak out" - and insists there will be no retreat on deficit reduction.