|
|
|
|
|
|
|
| Motor ratings |
|
T7502-a |
Motor power 7.5 kW (10 HP) variable rotational speed control |
|
T7503-a |
Motor power 9.5 kW (13 HP) S6-60%, with variable rotational speed control |
|
T7504-a |
Motor power 11 kW (15 PS) S6-40%, with variable rotational speed control |
|
T7501-a |
Motor power 7.5 kW (10 HP) |
| Control options, additional controlled axes |
|
T75SW200-a |
Software module "post processor ARDIS" |
|
T75SW210-a |
Software module "post processor CPOUT“ |
|
T75SW100-a |
T75SW100-a Interface package to link the T75 to panel-cutting optimisation software; |
|
T7518-a |
Peer-to-peer interface for connecting the control to an external PC, |
|
T7514-a |
Additional saw blade guard 105 mm, |
|
T7513-a |
Additional saw blade guard 60 mm, |
|
T7511-a |
Motorised positioning of rip fence |
|
T7510-a |
10.4" (264 mm) touch screen control, colour - LCD (16-bit colour depth) |
| Cutting lengths |
|
T7508/6-a |
Length of sliding table 4.3 m, supplied with 2 support feet |
|
T7508/1-a |
Length of sliding table 1.9 m (no extra charge) |
|
T7508/3-a |
Length of sliding table 3.0 m - standard cutting length - |
|
T7508/4-a |
Length of sliding table 3.3 m |
|
T7508/5-a |
Length of sliding table 3.7 m |
|
T7508/8-a |
Length of sliding table selectable between 3.7 to 5.1 m |
| Cutting widths |
|
T7509/2-a |
Cutting width 1100 mm |
|
T7509/3-a |
Cutting width 1350 mm |
|
T7509/4-a |
Cutting width 1600 mm |
| Scoring saws |
|
T7524-a |
Scoring saw blade set for scoring unit T7523-a |
|
T7523-a |
Scoring saw unit PreX |
| Cross cut tables, mitre stops and cross cut fence |
|
T7551-b |
"RadioCompens" mitre cut system, continuous support |
|
T7539/1-a |
Additional analogue and/or digital stop elements |
|
T7541-a |
Digital cross cut fence with continuous support and two stop elements |
|
T7540-a |
Digital cross cut fence with two point support and two stop elements |
|
T7533-a |
Double mitre fence DGA 900 Top Digital, |
|
T7534-a |
2000 mm stop extension for T7532 and T7533, extendable to 2700 mm (106") |
|
T7535-a |
Mitre cross cut table |
|
T7536-a |
Extendable support for mitre cross cut table T7535 |
|
T7537-a |
Cross cut fence with continuous support and two flip stop elements |
|
T7531-a |
Extendable support for standard cross cut table |
|
T7532-a |
DGA 900 Top, with digital angle display (resolution 0.1°); |
|
T7550-b |
"RadioCompens"mitre cut system, 2-point fence |
| Parallel cuts |
|
T7559-a |
Edging stop for multi purpose table |
|
T7559/1-a |
Fixed positions for setting of multi-purpose table |
|
T7558-a |
Multi-purpose table with roller supports |
| Additional supports and support tables |
|
T7567-a |
Front support table |
|
T7568-a |
Second support |
|
T7555-a |
Parallel cutting stop for sliding table for installation on T7568-a "second support" |
|
T7565-a |
Roller support leg for standard cross cut table |
|
T7560-a |
Additional rear extension table |
|
T7548-a |
Additional standard cross table |
| Clamping devices |
|
T7570/6-b |
4.3 m pneumatic pressure bar |
|
T7570/4-b |
3.3 m pneumatic pressure bar |
|
T7570/5-b |
3.7 m pneumatic pressure bar |
|
T7570/3-b |
3.0 m pneumatic pressure bar |
|
T7570/1-b |
1.9 m pneumatic pressure bar |
|
T7569/1-a |
Pneumatic clamping device with remote control unit |
|
T7569/4-a |
Manual eccentric clamp |
| Additional accessories for your convenience |
|
T7577-c |
On/off switch for main saw and scoring saw unit |
|
T7574-a |
Pneumatic lowering of rip fence below table level |
|
T7573-a |
Laser cutting line indication |
|
T7572-b |
Edging device |
|
T7571-a |
Electrically powered sliding table |
New Machinery 
