|
Leadermac Planermac 450mm Capacity |
|
| Choice of machine models, from LMC-445(4-spindle), LMC-545 (5-spindle), LMC-645 (6-spindle), LMC-745 (7-spindle) to LMC-845 (8-spindle). |
| Ideal for producing profiled strips for fingerjointing and sideboard drawer applications. |
- Programmable controller provides convenient width and depth of cut setting.
- The full safety enclosure serves as a chip guard and helps to reduce noise.
- Pneumatic pressure of the feed rollers can be easily set to provide an outstanding feeding effect.
- Table surface is hard-chrome plated for maximum wear resistance.
- One-piece, steel iron machine frame is specially heat treated for maximum stability and rigidity.
- Each spindle is driven by an individual motor for powerful moulding and easy control.
- The smooth initial feeding of stock is achieved by means of independently pneumatic feed rollers.
|
Features
 |
Fully adjustable Pneumatic feed pressure system |
 |
6 pnuematic roller pressures for maximum control around the bottom head |
 |
First bottom and top heads are supported with large outboard bearings. |
| Working Width (at a tool cutting circle of 140mm) |
20-450mm |
| Working height (at a tool cutting circle of 163mm) |
10-200mm |
| Number of spindles, min-max |
4-8 |
| Basic motor capacity per spindle |
11 KW / 15HP |
| Basic motor capacity of feed |
11 KW / 15HP |
| Spindle speed |
5500 RPM |
| Spindle diameter |
50mm |
| Tool cutting circle, first bottom spindle, min-max |
125-180mm |
| Tool cutting circle, vertical spindles, left, min-max |
112-200mm |
| Tool cutting circle, vertical spindles, right, min-max |
112-200mm |
| Tool cutting circle, horizontal spindles, top, min-max |
100-200mm |
| Tool cutting circle, horizontal spindles, bottom, min-max |
100-200mm |
| Feed motor |
7.5 HP |
| Feed speed, infinitely variable by frequency driven motor |
6-24 m/min |
| Feed roller diameter |
200mm |
| Feed roller width |
4 x 50mm |
| Pneumatic pressure for feed rollers, max |
6 bar (87psi) |
| Adjustment range for infeed table and edge-jointing fence |
10mm |
| Adjustment range of vertical spindles (axial) |
30mm |
| Adjustment range of horizontal spindles (axial) |
20mm |
| Length of the straightening table |
1.4m |
| Mechanical digital readouts for the pressure shoes & hold-down unit |
| Full sound and safety enclosure |
| Motorized vertical adjustment of feed |
| Lateral pressure roller opposite first right spindle |
| Chainless cardan feed system |
| Program system provides faster setting. |
| Setting and measuring devices |
| Length of infeed table 2, 2.5 or 3 meters |
| Increased horsepower |
| Moulding width up to 500 mm, 600 mm is available |
| Moulding thickness up to 200mm, 300mm are available |
| CE specifications |
|
New Machinery 