SAC F30 Series Window Line

Brochure Download

Tenoning + inner profiling of window elements

Tenoning + profiling for pre-squared systems

Sash squaring after assembly with tenoning carriage and profiling side

Sash and frames outside profiling using the profiling side only

Straight tenoning or “tilted tenoning ± 60° “ by means of work-piece interpolation

Single piece tenoning or tenoning of 2 pieces at the same time

CNC automatic positioning of tools for requiredoperations for CNC controlled automatic setting of tenoning depth, tilting and work-piece length

Automatic work-piece rotation (180°) between the first and the second tenoning

Automatic transfer of work-pieces from the tenoning phase to the profiling side

CNC controlled automatic positioning of left/hand profiling fence, according the programmed workpiece width

Technical Features
Min. work-piece length (inner tenon)	mm	250
Max. length (reference on electronic length fence)	mm	3000
Min. width	mm	10
Min. work-piece height	mm	30
Max. work-piece height	mm	100
Max. tenoning depth	mm	114 with 320 diameter 129 with 350 diameter
Tilting tenoning		± 60°
Work-piece holding collet speed	m/min	0-60

Cut off unit
Motor power	KW	4
Blade dia	mm	400
Blade speed	g/min	3000
Blade shaft dia	mm	30
Max height of cut	mm	100
Dust extraction upper outlet diameter	mm	100
Dust extraction upper outlet capacity	m3/ora	800
Dust extraction lower outlet diameter	mm	100
Dust extraction lower outlet capacity	m3/ora	800

Tenoning Spindle (A) with counter-support
Spindle dia	mm	50
Spindle length	mm	620
Spindle vertical stroke	mm	560
Base position under table	mm	10
Spindle vertical adjustment speed	m/min	4
Spindle revolving speed	g/min	3500
Spindle sense of rotation		DX
Standard motor power	KW	7,5
Max tool diameter	mm	320-350
1st extraction outlet diameter	mm	100
1st extraction outlet capacity	m3/ora	800
2nd extraction outlet diameter	mm	160
2nd extraction outlet capacity	m3/ora	2000

1st and 2nd Profiling Spindle
Spindle dia	mm	50
Spindle length	mm	320
Spindle vertical stroke	mm	295
Spindle horizontal stroke	mm	60
Base position under table	mm	10
Spindle vertical adjustment speed	m/min	5
Spindle revolving speed	g/min	6000
Spindle sense of rotation	1° spindle 2° spindle	DX DX-SX
Standard motor power	KW	7,5
Base tool diameter	mm	110-140
Max tool diameter	mm	240
Extraction outlet diameter	mm	160
Extraction outlet capacity	m3/ora	2000

Feed Unit
Motor power	KW	0,75
Feed speed	m/min	4-20
Number of feed wheels		19
Diameter of rubber-coated feed wheels	mm	145

Hydraulic System
Motor power	KW	0,37
Pump capacity	lt/min	12
Tank capacity	lt	20
Hydro-pneumatic accumulator capacity	lt	0,7

Tenoning Carriage

Single piece tenoning or tenoning of 2 pieces at the same time (coupled)
90° tenoning or by interpolation (axis X and axis Y) tilted tenoning ± 60°
Carriage movement (axis X and axis Y) by means of precision rack-and-pinion driven by brushless motor, sliding on linear ball guides, dust-proof and chip-proof guides
Work-piece holding coller with speed 0-60 m/min
Carriage speed 0-60 m/min
CNC controlled automatic setting of tenoning depth, tilting and workpiece length
Automatic work-piece rotation (180°) between the first and the second tenoning
Automatic transfer of work-pieces from the tenoning phase to the profiling side

Other Features

HYDROSTATIC tool positioning guides. This system separates the surfaces Guide-Slide with an oil film under pressure. The static friction coefficient is therefore avoided.
no clearance
no mechanical adjustment
no wear with use
no lubrication of guides
no cleaning of guides

Price on application